Version 26.01.2022
HW: CAM(100)/(V20/Y+V41)
CI-RL4-SY3
P
a
g
e
16
2.5.
Special case: Sync3 Light (R5) version with 6.5inch or 8inch tablet monitor and radio
module with HSD + Sync Connected Radio version with 4inch monitor
Place of installation:
The picture signal cable is connected behind the monitor. The PNP
power / CAN cable is connected to the factory radio module (hidden DIN housing). This is
behind/under the monitor in the centre console on most vehicles. There is no APIM-module
with these Sync versions.
For connection to the Sync3 Light (R5) or the Sync Connected Radio infotainment, the PNP Power/CAN
cable’s 4 single wires have to be cut near the big 54pin harness. The 54pin connection can`t be used!
No liability for vehicle wire colours and pin definition!
Changes by the vehicle manufacturer are possible.
The given information has to be verified by the installer.
