NT888G MK2 AUTOPILOT OPERATING MANUAL
1.21 Using NT920NFU Dodge and Power Steer (if fitted).
NT920NFU Operating Instructions: -
NB.
The NT920NFU(s) will only function when the Autopilot “
REMOTE
” key is set to
enable Remote inputs (REMOTE key corner LED on). If the “
REMOTE
” key is off
(no corner LED) the NFU(s) will be disabled.
DODGE MODE: -
(i)
Check that the Autopilot “
REMOTE
” key is activated.
(ii) Select
DODGE
on the
NT920NFU
selector switch.
(Confirmed by illumination of DODGE READY LED).
(iii)
Move and hold the NT920NFU Jog Lever right (STBD) or Left (PORT) to
apply corresponding rudder and override the Autopilot.
(iv)
Release the Jog Lever to centre when ready for the Autopilot to return
the vessel to the original Autopilot heading.
NFU MODE: -
(i)
Check that the Autopilot “
REMOTE
” key is activated.
(ii) Select
NFU
on the
NT920NFU
selector switch.
(Confirmed by illumination of the POWER STEER LED).
(iii) Move the NT920NFU Jog Lever Right (STBD) or Left (PORT) and
release the Jog lever to centre when the required angle of applied
rudder is attained.
(iv)
Repeat Jog Lever operation as necessary to align the vessel on the new
heading required.
