USER MANUAL
NAVWATCH-S10
10 |
P a g e
4.
Using a combination of the LIGHT and REC buttons to adjust time values and to
select whether to turn this feature ON or OFF.
5.
Using the function button toggle to ARC1. While it is flashing, use the LIGHT and
REC buttons to move to ARC2 (T2) and adjust the same as described above.
6.
Press the MODE to confirm and exit when finished.
Note: Press and hold the LIGHT and REC buttons to advance more quickly through
minutes and hours.
STOPWATCH
1.
From the time screen, press and hold the LIGHT
button until the digits SPWH (Sports Watch) appears.
Lap timing (Last lap compared to current lap)
1.
Press the LIGHT button to begin the timer. The larger
timer digits will begin rolling.
2.
Once a lap time has finished, press the LIGHT button again. The timer result will
then move to the above smaller timer digit readout, while the larger timer read-
out resets to 0 (zero) and begins rolling again.
3.
Each subsequent press of the LIGHT button will advance the lap number on the
screen.
Note: This device can store up to 10 entries. The stopwatch should be stopped and reset
if further records are needed.
4.
Press the REC button once timing has finished.
5.
To scroll through each timer record, then press the FUNCTION button repeatedly.
To reset the unit back to 0 (zero) and to clear the memory data press the LIGHT
again.
6.
To return back the main time screen, press the MODE button.
Split timing (Last lap added to current lap)
1.
Press the REC button to begin the timer. The larger timer digits will begin
rolling.
2.
Once a lap time has finished, press the REC button again. The timer result will
