12 Operating the Boiler
Item
Description
14. Fan Current RPM
Fan speed (RPM)
15. Fan Target APS
Fan target speed (APS)
16. Fan Current APS
Fan speed (APS)
17. Exhaust Temp
Exhaust temperature (°C)
18. OTC ON/OFF
OTC status (Enabled/Disable)
19. K-Factor Set Value
K-Factor set value
20. Model
Model type
21. Type
Boiler type
22. Gas
Fuel type (NG/LPG)
23. Main F/W ver
Main firmware version
24. Panel F/W Ver
Controller panel firmware
version
Note
The fan moter controls the APS, so the fan target
speed (Fan Target RPM) is only for your reference.
3.4 Resetting the Boiler
If an error message appears, you can try resetting the boiler to
resolve the problem. To reset the boiler, press the Back button
(
).
If resetting the boiler does not solve the problem, refer to the
Troubleshooting section of this manual or contact a Technical
Assistance Service.
