13
Operating the Boiler
3.4 Resetting the Boiler
If an error message appears during boiler operation,
clear the message and resolve the problem. Press
the Back button (
) on the front panel to reset the
boiler.
If resetting the boiler does not solve the problem,
refer to the Troubleshooting section of this manual
or contact Technical Support at 1-800-519-8794.
Item
Description
22. Flow Control
Valve Status
100 - Close State
23. Mixing Valve
Status
0 - Close State
24. Exhaust Temp
Exhaust Temperature (°F)
25. Outdoor Reset
Outdoor Reset Status
(Enable/Disable)
26. Outdoor Reset
Curve
Outdoor Reset Curve Load
Type (Displayed when the
outdoor reset option “20.
Outdoor Reset”is enabled.)
1: Finned Tube Baseboard
2: FAN Coil
3: Cast Iron Baseboard
4: Low Mass Radiant
5: High Mass Radiant
6: Radiator
7: Custom (Set by installer.)
27. Boost Interval
Time
Boost Interval Set Time
(min)
28. High Altitude
Sea Level (0 - 2,000 ft)
Level 1 (2,000 - 5,400 ft)
Level 2 (5,400 - 7,700 ft)
Level 3 (7,700 - 10,100 ft)
29. Well Pump
Well Pump Status
OFF - Unused, ON - Used
30. Model
Model Type
31. Gas
Fuel Type (NG/LPG)
32. Main F/W Ver
Main Firmware Version
33. Panel F/W Ver
Controller Panel Firmware
Version
Summary of Contents for NCB-190/060H
Page 29: ...Memo ...
Page 30: ......