background image

24        Warranty

 

Performance problems caused by improper sizing of the boiler, 

the gas supply line, the venting connection, combustion air 

openings, electric service voltage, wiring, fusing or any other 

components, parts or specifications.

 

Improper conversion from natural gas to LP gas or LP gas 

to natural gas or attempt to operate with a type of gas not 

specified for the boiler.

 

Any damage, malfunction or failure caused by abuse, 

negligence, alteration, accident, fire, flood, freezing, wind, 

lightning and other acts of God.

 

Operating, using or storing the boiler in a corrosive or 

contaminated atmosphere or environment.

 

Operating the boiler at water temperatures outside the factory 

calibrated temperature limits and/or exceeding the maximum 

setting of the high limit control.

 

Operating the boiler when it is not supplied with potable water 

at all times.

 

Subjecting the heat exchanger to pressures or firing rates 

greater or lesser than those shown on the rating plate.

 

Installation at any location outside the United States and 

Canada.

 

Removal or alteration of the rating plate.

Other Terms

: This Limited Warranty is subject further to the terms 

and conditions set forth herein and as may be further specified 

in the terms and conditions page located on Navien’s website at 

www.navienamerica.com. WITH THE EXCEPTION OF THIS LIMITED 

WARRANTY, NAVIEN DISCLAIMS ANY OBLIGATION OR LIABILITY 

WITH RESPECT TO THE PRODUCTS OR THEIR SALE AND USE, AND 

NAVIEN NEITHER ASSUMES NOR AUTHORIZES THE ASSUMPTION 

OF, ANY OBLIGATION OR LIABILITY IN CONNECTION WITH THE 

PRODUCTS. THIS DISCLAIMER INCLUDES ANY OTHER WARRANTIES, 

EXPRESS, IMPLIED OR STATUTORY RESPECTING THE PRODUCTS 

OR ANY PARTS OR COMPONENTS THEREOF, INCLUDING, BUT NOT 

LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR PURPOSE. Navien’s total liability 

for any claim arising hereunder shall not exceed the purchase 

price which you paid for the product. NAVIEN SHALL NOT IN ANY 

EVENT BE LIABLE FOR INDIRECT, SPECIAL, CONSEQUENTIAL OR 

LIQUIDATED DAMAGES OR PENALTIES, INCLUDING CLAIMS FOR 

LOST REVENUE, PROFITS OR BUSINESS OPPORTUNITIES, EVEN IF 

NAVIEN HAD OR SHOULD HAVE HAD ANY KNOWLEDGE, ACTUAL 

OR CONSTRUCTIVE, OF THE POSSIBILITY OF SUCH DAMAGES. 

Summary of Contents for NCB-180



























Reviews: