| 15
Connect the Broadband radar to your display |
Broadband 3G/4G™ Radar Installation Guide
Lowrance: HDS outside USA or with MARPA / chart overlay
Simrad: NSS
(NMEA2000 network)
The 3G and 4G radar connects to the Lowrance HDS and Simrad NSS in the same manner
+_
FUSE
FUSE
FUSE
Parts required for chart overlay / MARPA
1
2
3
4
5
6
7
9
9
10
8
NMEA2000 Network
NMEA2000
Ethernet
Po
we
r
Lowrance HDS
or
Simrad NSS
1.
Lowrance HDS or Simrad NSS
2.
Broadband 3G™ or 4G™ Radar
3.
Interconnection cable (Lowrance 10 m (33 ft) Simrad 20 m (65.5 ft))
4.
RI10 Radar interface box
5.
Ethernet cable (1.8 m (6 ft)). The RI10 can connect either directly to a Multifunction display
or via an Ethernet switch (NEP-2), or a free port on an LSS-1 Structure scan module. For cable
options see “Ethernet cables” on page 28
6.
NEP-2 Network Expansion Port. 5 Port Ethernet switch
The following Parts required for MARPA and / or chart overlay:
7.
RC42 Heading Sensor
8.
SimNet cable. For cable options see “SimNet cables” on
page 28
9.
S
imNet - NMEA2000 adapter kit: a) SimNet -Micro-C cable 0.5 m
(1.6 ft), b) SimNet joiner. c) NMEA2000 T-Connector
HDS
NSS
NMEA2000
Ethernet
a
b
c
RADAR_3G_4G_IG_988-10113-003_EN_P.indd 15
2/11/2011 1:59:58 p.m.
