| 13
Installation |
Broadband 3G/4G™ Radar Installation Guide
Shortening the cable
It is not recommended to shorten the cable, but if it is unavoidable, use the pin-out below to
re-terminate the cable with a new RJ45 plug.
RJ45 Connector pinout
P1
P8
Pin
Color
1
White/Orange
2
Orange
3
White/Green
4
Blue
5
White/Blue
6
Green
7
White/Brown
8
Brown
Required to complete
RJ45 Connector
RJ45 Crimping tool
Mounting the radar interface box
•
Install the radar interface box (where applicable) in a dry location away from spray, rain,
drips and condensation
•
The radar interface box must be located where it can be easily connected to the ship’s
power source, the scanner interconnection cable, SimNet/NMEA2000 and the display or
display network
•
Allow enough room for cables to form a drip loop
•
Preferably mount the radar interface box on a vertical surface with cables exiting
downwards
•
Insert connectors . See “Connect the interconnection cable to radar interface box” on page
12
•
Secure to the surface using the four mounting points and supplied 8G x 5/8 pozi s/s fasters
RADAR_3G_4G_IG_988-10113-003_EN_P.indd 13
2/11/2011 1:59:50 p.m.
