| 11
Installation |
Broadband 3G/4G™ Radar Installation Guide
Connect interconnection cable to the scanner
The scanner interconnection cable connects the scanner to the RI10 interface box (or Lowrance
HDS via and ethernet adapter cable - 3G U.S only). The cable connects to the scanner using a
14 pin connector.
•
Protect the connectors when pulling cable through the boat and avoid putting strain on
to the connectors
•
The interconnection cable is 9 mm in diameter. A 14 mm hole will be required in order
for the RJ45 connector to pass through (Interface box end) or 24 mm for the scanner end
connector
•
Run the interconnection cable between the scanner and the location of the radar inter-
face box
•
Insert cable connector on to the male 14 pin plug on the scanner
•
Take care to align the connector correctly to avoid bending the pins. Secure the locking
collar by rotating clockwise until it clicks
•
Feed and secure the cable into the cable retention channel
Scanner Interconnection cable pin out
Scanner connector
Cable connector
Diameter = 23 mm
Pin-out Wire color
RJ45
1
Black
Tinned wire
2
Red
Tinned wire
3
Yellow
Tinned wire
4
Drain
Tinned wire
5
N/A
N/A
6
Blue
RJ45 Pin 4
7
White / Blue
RJ45 Pin 5
8
White / Brown
RJ45 Pin 7
9
Brown
RJ45 Pin 8
10
White / Green
RJ45 Pin 3
11
N/A
N/A
12
White / Orange
RJ45 Pin 1
13
Green
RJ45 Pin 6
14
Orange
RJ45 Pin 2
RADAR_3G_4G_IG_988-10113-003_EN_P.indd 11
2/11/2011 1:59:44 p.m.
