24
Care and Maintenance
Trouble shooting
Setting up an account
•
If the verification email is not received, please check the Spam folder.
•
We have tested this to work with Gmail and Yahoo mail, but we had problems with
Office (365 mail)
•
Check your internet connection
Logging in and logging out
•
If connection failed, check your internet connection
Connecting wireless communication buoy with Navatics MITO
If the communication buoy fails to connect with Navatics MITO, check and make sure:
•
Navatics MITO is turned on
•
The communication buoy is turned on
•
The tether roller is connected
•
Once connected, the signal LED on the communication buoy will blink
Binding the communication buoy and remote to your account
•
Check your internet connection
•
Check if you are logged in to your account
•
The binding should be done in sequence, i.e. the remote should be bound before
you can search and bind a communication buoy
Unbinding communication buoy and remote to your account
•
Check your internet connection
•
The unbinding process should be done in sequence, i.e. if you wish to unbind both
devices the communication buoy should be unbound first, then the remote
Operating Navatics MITO
•
If the LED is Red, there might be problems with the internal hardware. Check if
there is any damage to motors and restart the ROV
•
If the motor suddenly stop, normally that was caused by something stuck on the
propeller (e.g. seaweed or sands)
•
The LED will automatically dim at 0.2m deep in water
Summary of Contents for Mito
Page 1: ...I Underwater Drone Owner s Guide...
Page 17: ...12 Quick Start...
