Navatics Mito, Owner'S Manual

Page: 22 / 35

17
Preparing for Dive
Wireless communication buoy :
1. Pull up the antennae and wait until the power indicator lights up
2. Connect the tether from the Wireless Communication Buoy to the top connector of the
robot. Wait until the signal indicator blink shows that the tether roller is ready to
transmit video and data to the remote controller.
3. Hook the tether on the tether hook
NOTE :
It is strongly recommended to cover the Type-C charging port with the provided rubber cover
attached to the charging port and it is a MUST when putting the wireless communication buoy
in water.
On: Turned on / Charged
Blinking: Charging
Flashing: Low battery
charge
On: Establishing connection
Blinking: MITO Connected
Off: MITO not connected