19
Preparing for Dive
Sensor Calibration
When first receiving MITO, it is recommended for users to calibrate the gyroscope and
compass. In addition, compass re-calibration is recommended when diving in new places, to
adjust to the magnetic condition of the dive site. The instructions below provides guidelines to
calibrate the compass.
1.
Start MITO and the tether floatation, and connect the Senseplay Race to MITO..
2.
Start the Navatics app in the smartphone.
3.
Go to Camera View and click on the parameters settings icon to open the dialog box.
4.
Go to the calibration page in the app
5.
Place MITO on a flat ground, allow it to stay still, and press calibrate gyroscope. MITO
will be restarted and the LED light will flash.
6.
The calibration process runs for around 1 second each.
7.
Finally, press calibrate compass. The calibration process is as following:
8.
Hold MITO with the bottom facing the ground. Rotate horizontally for 360 degrees.
9.
Once the calibration finished the LED will be turned off.
Summary of Contents for Mito
Page 1: ...I Underwater Drone Owner s Guide...
Page 17: ...12 Quick Start...
