BHM
10/25/18
NTV-DOC257
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
2 |
P a g e
USB Cable
NTV-CAB009
Optional Reverse Cameras
F-Series/Flex CAM
Transit-CAM
included in
NTV-KIT623
CAM 6
RCA input cable
NTV-CAB071
Overview
The FORD
4” UNI
-CAM KT2 kit interfaces an aftermarket rear (and optional front) camera into Ford vehicles equipped
with the OEM 4”
media screen. No dealership programming is required and this kit if fully Plug & Play behind the factory
media screen.
Note: before installing this module, VERIFY 75 ohms exists across pins 6 & 12 with a multimeter at the
4” screen connector.
Kit Contents
Ford 4” UNI
-CAM pin out
PIN #
Description
Color
1
12v (+) constant input
Yellow
2
Input 1:
Force RVC
Red
3
Input 2:
Force FVC/AUX VID
Blue
4
Input 3:
--Not Used--
Pink
6
VIDEO OUT RCA
Orange/White
7
RCA Shield
Orange
8
CAN HI (Radio Side)
White/Blue
9
CAN HI (Car Side)
Brown/Black
10
Ground (-)
Black
11
Output 1:
ACC (+)
White/Red
12
Output 2:
Reverse (+)
White/Blue
13
Output 3:
Front CAM power
White/Purple
15
Front RCA Video IN
White
16
Rear RCA Video IN
Yellow
17
CAN LO (Radio Side)
Blue
18
CAN LO (Car Side)
Brown
KT2 UNI-CAM Module
NTV-ASY245
Plug & Play T-Harness
NTV-HAR271
Wire side
Any additional wires not mentioned here are
not used for this install.
