BHM
11/18/14
NTV-DOC117
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
9 |
P a g e
NOTE 6
: Front Camera OFF disables the Front camera function.
NOTE 7
: Select “FRONT CAMERA” for the Programmable Output A or B that will provide power
to the camera (see 5 & 6).
NOTE 8
: Selecting “FLIR” enables menu items 9, 10, and 11. If not selected, then the settings
Menu cycles back to item 1, RADIO TYPE, after item 8.
NOTE 9
: FLIR Camera communication requires Pin 5 and Pin 14 of the Barracuda Wire Harness
to be tied together and connected the controller wire of the FLIR Harness. (See diagram below.)
9.
FLIR ZOOM:
2X zoom is available for the FLIR camera and can be set as follows:
Always OFF:
Zoom is normally disabled.
Always ON:
Zoom is always on.
On High Beam:
Zoom on when high beams are active.
On High Beam or > 20MPH:
Zoom is enabled on High
Beam or when the speed is greater than 20MPH. The zoom
function turns off at 15MPH.
On High Beam or > 40MPH:
Zoom is enabled on High
Beam or when the speed is greater than 40MPH. The zoom
function turns off at 30MPH.
On High Beam or > 60MPH:
Zoom is enabled on High
Beam or when the speed is greater than 60MPH. The zoom function turns off at 50MPH.
10.
FLIR COLORS:
The Barracuda module allows you to modify the
colors the FLIR camera outputs to the radio LCD.
White Hot:
Black and white image, with White indicating hot.
Black Hot:
Black and white image with Black indicating hot.
Sepia:
Brown and black image.
Rainbow:
Color image with Red indicating hot.
11.
FLIR MOUNT:
The FLIR Camera can be mounted 1 of 2 ways, upright
or up-side down. This setting allows you to configure the image on the screen to the mounted
position of the FLIR camera.
Normal:
Select when the FLIR camera is physically mounted
right side up.
Inverted:
Select when the FLIR camera is physically mounted
upside down.
