NAUCON-1000 – USER MANUAL |
11
Fig. 7 – “Page 3/7”:
1
Time-out horn signal time
Changes the length of the automatic
horn blowing when pressing time-out in
an ongoing game. Default is 2 sec.
2
Game horn signal time
Changes the length of the automatic
horn blowing at the end of a game.
Default is 2 seconds.
3
Wireless power
Choose between four settings regarding
wireless power: OFF, LOW, HIGH and
BOOST. The wireless range of the NAU-
CON-1000 will then be adjusted.
OFF: Radio power off, wired only.
LOW: Minimum power.
HIGH: Maximum power.
BOOST: Used for test-purpose only.
Default is HIGH.
4
Basketball shot clock led
ON: The shot clock led stripe turns on
when the shot clock runs out.
OFF: The shot clock led stripe is disa-
bled.
Default is ON.
5
Shot clock horn signal time
Change the length of the automatic
horn blowing when the shot clocks
countdown runs out. Default is 2 sec.
6
Board zones setup
This is where you enter the board zone
setup
.
See a more detailed description
on page 14.
7
Basketball shot clock blank at reset
ON: The shot clocks will show as blank/
black until the game starts.
OFF
: The shot clocks will show 24,
if set
according to the 24 second rule
.
Default is OFF.
8
Default time-out time for:
Basketball:
1 min.
TIME-OUT HORN
SIGNAL TIME
2
1:00
CANCEL
CHANGES
PAGE 3/7
MORE
DEFAULT
SETTINGS
ACCEPT
CHANGES
SHOT CLOCK HORN
SIGNAL TIME
BOARD ZONES
SETUP
WIRELESS
POWER
GAME HORN
SIGNAL TIME
BASKETBALL
SHOT CLOCK
LED
BASKETBALL
SHOT CLOCK
BLANK AT RESET
BASKETBALL
TIME-OUT TIME
SERVICE MENU
2
HIGH
2
OFF
ON
Fig. 7 – Service menu “Page 3/7”
1
4
7
2
5
8
3
6
