NAUCON-1000 – USER MANUAL |
45
To update to the latest version of software
to the NAUCON-1000, follow the steps
below:
1
– Turn the NAUCON-1000 off.
2
– Plug in the power supply.
3
– Press and hold the
SETUP
button.
While still holding the
SETUP
botton:
4
– Turn the NAUCON-1000 on.
5
– Release the
SETUP
button.
6
– The touch screen will display the fol-
lowing text: “BOOTLOADER STARTED,
INSERT USB DRIVE.”
7
– Insert a USB stick with software sup-
plied by Nautronic A/S
8
– The touch screen will display the fol-
lowing text: “DISK FOUND.”
After 10-15 seconds:
9
– The touch screen will display the
following text: “PLEASE REMOVE
DRIVE.”
10
– Remove the USB stick.
11
– The NAUCON-1000 unit turns off.
→
Software update is done.
WHEN THE NAUCON-1000 IS TURNED
ON FOR THE FIRST TIME AFTER A SOFT
-
WARE UPDATE, IT WILL TAKE APPROX
-
IMATELY 1 MINUTE LONGER THAN A
NORMAL START UP.
Fig. 39 – NAUCON-1000,
where do the plugs go
Updating the NAUCON-1000 software
WARNING:
WHEN SOFTWARE UPDATE IS PERFORMED, ALL SAVED CONFIGURA
-
TIONS WILL BE LOST AND SET TO DEFAULT!
Connect to scoreboard
Shot clock handle
Power
Insert USB stick here
