73
14. Using a #2 Phillips screwdriver remove the 2 indicated screws from
the MCB Cover and remove it.
15. Remove the Lower I/O Cable connector from the Motor Control Board
after noting the location.
Note: Be sure to note where the Lower I/O Cable attaches for re-assem-
bly.
16. Remove the old Lower I/O Cable from the Frame Assembly. Route the
new Lower I/O Cable into the Frame Assembly following the old Cable as
a guide.
Note: do not crimp the Cables.
17. Connect the Lower I/O Cable connector to the Motor Control Board in
the proper location.
Note: do not crimp the Cable.
MCB Cover
Lower I/O Cable
Motor Control
Board (MCB)