32
Replace the Crank Arm
on the Schwinn
™
IC3/IC7/700IC Bikes
Skill Level: II
8018897.041521.E
Replacement Procedure
NOTICE:
This document provides instructions for the replacement of the Crank Arm on the Schwinn
™
IC3, IC7 and 700IC Bikes.
When replacing the Pedals into the Crank Arms, if the threads strip due to improper installation then the Pedals can disengage
from the bike and/or break while under usage, which can result in serious injury to the user.
Note:
The Left Pedal is reverse-threaded.
Be sure to attach the Pedals on the proper side of the bike. Orientation is based from a seated position on
the bike. The Left Pedal has an “L”, the Right Pedal an “R”.
If you need assistance, please call
Schwinn
Customer Service(if purchased in US/Canada) or your local distributor (if purchased out
VLGH86&DQDGD7R¿QG\RXUORFDOGLVWULEXWRUJRWRZZZQDXWLOXVLQWHUQDWLRQDOFRP
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
,PSRUWDQW6DIHW\,QVWUXFWLRQV%HIRUHVHUYLFLQJRUXVLQJWKLVHTXLSPHQWREH\WKHIROORZLQJZDUQLQJV
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause
injury to the service technician or bystanders.
• Keep bystanders and children away from the product being serviced at all times.
• Disconnect all power to the machine before you service it.
0DNHVXUHWKDWWKHUHSDLULVGRQHLQDQDSSURSULDWHZRUNVSDFHDZD\IURPIRRWWUDI¿FDQGH[SRVXUHWRE\VWDQGHUV
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these
components. Do not try to do heavy or awkward steps on your own.
•
Use only replacement parts and hardware that are supplied or approved by Nautilus. Failure to use Nautilus-approved replacement parts can adversely
affect the safety and functionality of the equipment creating a risk to users and will void the warranty.
•
Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or
replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact
Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them.
• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.
• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.
• SAVE THESE INSTRUCTIONS.
Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. www.nautilusinternational.com | Printed
in China | © 2018 Nautilus, Inc. | Schwinn and the Schwinn Quality logo are trademarks owned by or licensed to Nautilus, Inc., which are registered or otherwise protected by common law in the United States and other coun-
tries. Other trademarks are the property of their respective owners. |
ORIGINAL DOCUMENT - ENGLISH VERSION ONLY
™
Tools Required (not included)
Flathead
screwdriver 25
mm
Crank
puller
17
mm
Wrench
16mm Socket and Wrench
15 mm Wrench
or adjustable wrench
Red
Loctite
®
272 or equivalent
(high
strength)
Blue
Loctite
®
242 or equivalent
(medium
strength)
29
