51
5
. Using a #2 Phillips screwdriver, loosen and remove the hardware
that attaches the Brake Cover to the Main Frame. Set the hardware safely
aside for reassembly.
NOTICE:
Hold the Brake Cover so that it does not fall.
6.
Carefully remove the Brake Cover and set it safely aside for
reassembly.
NOTICE:
Do not crimp the cable.
7
. Loosen the Resistance Knob (D) to the minimum resistance setting.
8.
Using a 10mm open end wrench, loosen and remove the hardware
(E1) that attaches the Brake Assembly (E) to the Frame Mount (F).
Remove the Brake Assembly and set it safely aside.
D
E
E1
F