26
NAUTILUS MX3-500RP SWITCH PANEL:
(Shown with optional Pump-Out)
Vacuum #2 – Power from Cord #2.
When the switch is turned to the ON position
power is supplied to the vacuum motor.
(3-Stage Vacuum)
Solution Pump Switch – Power from Cord #1
.
When the switch is turned to the ON position
power is supplied to the solution pump motor.
When not using solution (Extracting Only) do not
turn this switch ON.
OPTIONAL - Waste Pump Switch
Power from Cord #2.
Do not turn Waste Pump Switch ON unless a
hose is connected to the Pump-out Outlet port.
If the Float switch is down the pump will not
turn on when the switch is turned on. When
the water level gets high enough the Float
switch will turn the waste pump on and off
again when the level drops.
Vacuum #1 – Power from Cord #1.
When the switch is turned to the ON
position power is supplied to the vacuum
motor. (3-Stage Vacuum)
Cooling Fan – Power from Cord #1.
The cooling fan is not controlled by any
switch.
As soon as Cord #1 is plugged in the
cooling fan will turn on to exhaust air from
the base.
Summary of Contents for MX3-500RP
