Page 5
This page shows examples of the Nautilus® Leverage Strength® warning labels and communication stickers placed on the equipment
as part of the manufacturing process. It is critical that owners maintain the integrity and placement of these stickers. If you find any
stickers missing or damaged each sample indicated includes its corresponding part number so that replacements may be ordered.
NOTE: STICKERS AND LABELS ARE NOT SHOWN TO SCALE
Bolt Down Label
Instruction Placard
Serial Label
Pinch Point
Bolt Down Label
Instruction Placard
Serial Label
Pinch Point
IMPORTANT LABEL LOCATIONS
731-0512
TRICEPS EXTENSION
TRICEPS EXTENSION
PRIMARY
®
CAUTION
PRUDENCE
VORSICHT
THIS MACHINE IS EQUIPPED WITH LOCK N LOAD® TECHNOLOGY.
FOR WEIGHT SELECTION, SWITCH DESIRED PLATE TO THE
ON
POSITION. ALL OTHER PLATE SHOULD BE IN THE
OFF
POSITION.
731-7083-USA
READ ALL SAFETY WARNINGS PRIOR TO USE
ADJUST SEAT HEIGHT POSITION BY GRASPING RED
ADJUSTMENT BAR LOCATED AT THE SEAT BASE SO
UPPER ARMS ARE PLACED FLAT AND EVENLY ACROSS
THE ARM PAD
ALIGN ELBOWS WITH THE AXIS OF ROTATION
POINTS AND INSURE THAT DESIRED PRE STRETCH IS
ACHIEVED
SELECT A COMFORTABLE HAND POSITION WITH THE
WRISTS STRAIGHT IN THE VERTICAL GRIP POSITION
TO INITIATE MOTION, EXTEND ELBOWS IN A SLOW
CONTROLLED MOTION
TRICEPS
= PMS 152 C
= PMS
HEXACHROME
BLACK C
= PMS 1805 C
= PMS 355 C
731-7083-USA
731-0517