Nautilus Instinct Multi-Press, Owner'S Manual, Page: 12 / 20

12 NAUTILUS INSTINCT MULTI-PRESS O
WNER
’
S
M
ANUAL
PRODUCT USE AND MAINTENANCE
Repair of the INSTINCT MULTI-PRESS should be performed only by authorized persons.
NEVER modify the INSTINCT MULTI-PRESS or attempt to make adjustment(s) to, or the repair of, the unit equipment
without first calling NAUTILUS Product Support. Always notify authorized personnel to make such repairs.
Instruct all users to report any equipment or training irregularities to supervisory personnel IMMEDIATELY.
CAUTION:
Do not "high pin" and/or "double pin" a weight stack. This action is
considered to be dangerous to users, and bystanders, and may damage your
INSTINCT MULTI-PRESS . Aside from the mechanical damage that may result,
such action(s), in part, may cause the weight stack to crush or pinch fingers,
hands and/or extremities. DO NOT use the unit if the top plate is elevated and/or
pinned in a raised position. Seek assistance from authorized personnel to correct
such a condition.
MAINTENANCE SCHEDULE
Nautilus strongly recommends performing regular preventive maintenance on your NAUTILUS INSTINCT MULTI-PRESS .
Without regularly scheduled maintenance, normal wear and tear may cause cumulative effects, such as misalignment or
premature wear, resulting in downtime. For this reason, we highly recommend following the maintenance schedules.
Additionally, unusual symptoms, such as excessive noise during use, stiffness or free play in moving parts, etc., should be
investigated and necessary corrective actions (adjustment or parts replacement) should be performed. If any components are
found to be worn or damaged, the unit should be removed from service until repairs can be made. Only components supplied or
approved by Nautilus shall be used to maintain and/or repair the unit.
D
AILY
M
AINTENANCE

Wipe down and inspect the framework and other structural components (see F
RAMEWORK
M
AINTENANCE
on page 13 for
requirements). Check all attaching hardware for security. Tighten as needed.

Clean and inspect the upholstered cushions and the hand grips (see U
PHOLSTERY
M
AINTENANCE
on page 13 for
requirements).

Clean and lubricate weight stack and seat frame guide rods using a cotton cloth and break-free lubricant. Apply the lubricant
to the cloth, then wipe up and down the guide rods as needed.

Inspect weight belt for excessive wear or other damage. Check weight belt for proper tension (weight belt deflection at any
point should not exceed 25 mm); adjust as needed. (See
W
EIGHT
B
ELT
I
NSPECTION
R
EQUIREMENTS
on page 14 for
requirements.)

Check leverage arm support bearings for evidence of sticking or binding; lubricate as needed bearings are equipped with
fitting to facilitate lubrication).
W
EEKLY
M
AINTENANCE

Check the retainer screws at the weight stack top plate and main frame for security (retainer screws should be torqued to
400 inch-pounds). Tighten as needed.

Check all labels and placards affixed to the unit for legibility and security. Replace illegible labels and placards as needed
(see
L
ABELS AND
P
LACARDS
on page 15 for illustrations and part numbers of standard labels and placards used on
NAUTILUS INSTINCT products).
P
REVENTIVE
M
AINTENANCE