Nautilus Instinct Multi-Press, Owner'S Manual, Page: 10 / 20

10 NAUTILUS INSTINCT MULTI-PRESS O
WNER
’
S
M
ANUAL
6. Install the Weight Stack Shrouds
NOTE:
It is necessary to flex the lower
shrouds (9, 28) slightly to engage the mating
grooves in the weight stack frame (1).
Slide the lower front shroud (9) into the
mating grooves in the weight stack frame (1).
Slide the lower rear shroud (28) into the
mating grooves in the weight stack frame.
Install one tapped hole nut (39) onto each of
the six upper shroud mounting tabs on the
weight stack frame (1).
Hold one upper shroud (29) in position
against the weight stack frame (1), and
secure the shroud to the frame using three
screws (52) and washers (66).
Repeat for the remaining upper shroud (28).
7. Final Assembly and Testing
Check all attaching parts to ensure they are
tightened securely.
Verify operation of the leverage arm support:

Pull out on the pull pin in the leverage
arm support to retract the locking pin, and
hold in the retracted position. Rotate the
leverage arm, then release the locking pin.
Verify the locking pin engages a drilled
hole in the leverage arm ratchet.

Repeat to verify the locking pin engages the
drilled hole at all leverage arm positions.

Return the leverage arm to the first position.
Verify operation of the seat:

Mount the unit. Pull out on the pull pin
in the seat frame to retract the locking
pin, and hold in the retracted position.
Slide the seat forward, then release the
locking pin. Verify the locking pin
engages a drilled hole in the seat frame.

Repeat to verify the locking pin engages
the drilled hole at all seat positions.

Verify the seat slides smoothly, without
evidence of sticking or binding.
Mount the unit. Engage the selector pin at a
comfortable weight.
Operate the leverage arm and verify the
following:

Verify operation of the leverage arm is
smooth, without evidence of sticking or
binding.

Verify there is no evidence of "free play"
when actuating the leverage arm from
the "stowed" position.