Page 10
8. Use a 16mm socket and a 16mm
open-ended wrench to secure
the low row weldment to the
tower frame using four (4) pieces
each of the M10 x 140mm bolts
(110-3783) and M10 nylock
nuts (731-0363), eight (8) pieces
of the M10 flat washer (731-
0367), and two (2) pieces of the
weldment mount bracket (731-
3221).
F
ig
. 7
9. Set the upper low row frame into
place.
F
ig
. 8
10. Use a 16mm socket and a 16mm
open-ended wrench to secure
the upper low row weldment
to the tower frame using two
(2) pieces each M10 x 75mm
bolt (731-5516) and M10 nylock
nut, four (4) pieces of the M10
washer, and one (1) piece of the
76.2mm bracket connector (731-
3178).
F
ig
. 9
