step11:attachinguprightPlasticcovers
Locate the following for this step:
Parts:
• assembly from step 10
• right upright Plastic Cover (P/n - 17668)
• Left upright Plastic Cover (P/n - 17669)
hardware:
• 16 screws (P/n - 17815)
• 16 washers (P/n - 17578)
Tools:
• 1/8 allen bit
11-1 on the right side, attach the right upright Plastic
Cover using 8 screws (P/n - 17815) and 8 washers
(P/n - 17578). see figure 10.
11-2 repeat step 11-1 on the left side of the unit.
asseMbly InsTRUcTIons
figure 11: attaching upright Plastic Covers
right upright
Plastic Cover
Left upright
Plastic Cover
screw
Washer
step12:installingPowercord
Locate the following for this step:
Parts:
• assembly from step 11
• Power Cord
12-1 Locate the power cord for your region.
12-2 attach the power cord to the aC inlet on the
front motor Pan and then to the wall outlet
(see figure 12).
figure 12: installing Power Cord
Power Cord outlet
