MoniMax 7600T
Installation Manual
32
6.2 Module Setting
[Precaution]
Prior to the operation of this ATM machine, first make sure that all connectors like
communication cables, power cables and data cables inside modules which is
connected to cash dispenser, card reader, receipt printer, envelope depository,
control electronics and so on are completely connected or not. That’s why it is likely
to disconnect one of them due to a long and bad transportation and cause
unexpected problem after it will finish installation.
[CHECK POINT]
1. Check if there is a proper space or gap between Front Bezel and Cash Dispenser Shutter.
Normally there is just allowed to have 3mm distance in them (Refer to following
picture in the left)
2. Check the Cash Dispenser locking screw and button status.
Normally it should be lockup status