MoniMax 7600T
Installation Manual
19
4.3 Wall Cutting preparation
The wall should be prepared according to the following guidelines before installing MoniMax 7600T.
1) The maximum thickness of wall that enables you to install this machine should not exceed
240mm (9.45 inch).
2) Height shown in the figure is the minimum. You can adjust height up to 65mm (2.60 inch).
3) Dimensions for equipment installation are based on the floor area used by the customers outside
the building.
4) ±5mm (0.2inch) tolerance should be kept for all the measurements shown on the plan
(In case of Non- Adjustor Installation) (In case of Adjustor Installation)
Note : All the unit in the dimension is millimeter and
[ ]
is inch scale.