background image

 

 

W

ARRANTY

 

 
All  NAUTICAM  Housing  Products  are  warranted  against  any  material  and  manufacturing  defects  for  two 
years from the date of purchase for consumer use. Please fill in the warranty cards shipped with our housings 
and viewfinders at the time of sale and return them to your point of purchase within a month. If we do not 
receive the completed warranty card for a particular product, the warranty period would be assumed to 
begin  from  the  day  that  the  product  is  shipped  from  our  facility.  This  warranty  only  applies  to  products 
purchased from authorised NAUTICAM dealers and does not extend beyond the original retail purchaser. 

To return your product for service, please contact your regional authorized service centre(s). Please note 
that this warranty only applies when the product is purchased in the territory where the service centre is 
located. 

NAUTICAM accepts no liability for any damage to and defects in the housing caused by improper use and/or 
poor maintenance; it is the responsibility of the owner to carefully follow the instructions in our manuals. 

NAUTICAM  does  not  hold  responsibility  for  damage,  of  any  nature,  to  any  equipment  used  with  and/or 
placed within our products. 

NAUTICAM accepts no liability for any loss of captured images or the inability to capture images even if it is 
due to the malfunctioning of our products. 

Unauthorised modifications and/or repairs of our products will automatically invalidate the warranty.

 

Summary of Contents for NA-G9


































Reviews: