VS300 Operations and Maintenance Manual
Operating the transmitter
Page 2-132
Issue 8.0 2016-03-01
Email Configuration
) allows you to configure email parameters (e.g., email server
and port number), and is required if the notification feature is used (see
Figure 2.110: Email Configuration Page
To configure the email feature, perform the following steps:
1. Enter the four fields, noting the following:
•
Email Server
: In order to enter a server name (e.g., mail.nautel.com), at least one
nameserver IP address must be entered (see
).
•
Port Number
: This logical connection end point uses a number to identify the type of
process to which an internet or other network message is to be forwarded to when it
arrives at a server. Typically, this is set to 25 for unencrypted SMTP systems and 843 for
encrypted email.
•
Transmitter Name
: Set to a name that associates to the transmitter such as station
identification (e.g., VS_WXYZ). This name will be included in notification emails.
Note:
Nautel recommends that the following settings be entered/vetted by a qualified Network
Administrator.
All IP addresses
shown are for
reference
purposes only
Summary of Contents for VS300
