VS300 Installation Manual
Preparing for installation
Issue 6.0 2014-11-01
Page 1-1
Section 1:
Preparing for installation
Before installing your VS300 transmitter, perform the following steps:
1. Ensure that you have performed the pre-installation tasks described in the
VS300 Pre-installation Manual.
2. Inspect the shipping box for damage. Report any damage immediately to your Nautel sales
representative and the carrier.
3. Unpack the box. Remove all items from packing and place them on a suitable work area.
Check your packing list to make sure that you received all the components, including the
VS300, VS300 Manual CD
or USB
, installation kit and ancillary kit.
4. Assemble your parts and tools. For a list of required tools, see
“Parts and tools” on page 9-1
.
5. When you are ready to install the VS300 transmitter, follow the steps shown in
Figure 1.1 on
page 1-2
.
TIP
When you have completed a task or step, put a check mark beside the step
number.
CAUTION:
FAILURE TO COMPLY WITH RECOMMENDATIONS MAY VOID YOUR MANUFACTURER’S
WARRANTY. FOR MORE INFORMATION, REVIEW YOUR WARRANTY DOCUMENTS.
Summary of Contents for VS300
