Nautel NX400, Installation Manual

Page: 73 / 89

NX400 Installation Manual Parts and tools
Page 11-2 Issue 1.0 2017-06-30
Documentation
See “NX400 transmitter manuals” on page xii
Parts not supplied by Nautel
Some parts and materials required to complete installation are not supplied by Nautel. The parts you
need vary with the installation requirements. The list of parts you normally provide yourself during
installation include:
• A suitable 50

RF output coaxial cable, terminated by the proper connector, complete with
center male connector at the transmitter end.
• All external control and monitor wiring, including the associated terminating devices, con-
duit and conduit clamps.
• All electrical power cables, including conduit, terminating devices, and conduit clamps.
• A plastic sheet (or suitable equivalent), used to cover the top of the transmitter during instal-
lation to prevent debris and hardware from falling into the transmitter.
Parts ordering
You can order replacement parts from your Nautel sales agent, or directly from Nautel through the
Nautel website.
Module replacement program
Nautel offers a module replacement program for customers who require expedited servicing and
replacement of faulty modules. The module replacement program provides immediate replacement
of failed modules with refurbished modules.
• The replacement module is shipped to the customer as soon as the customer reports the fail-
ure. The customer then returns the failed module to Nautel using the same shipping package.