Nautel NX400, Installation Manual

Page: 19 / 89

NX400 Installation Manual Unpacking and positioning
Issue 1.0 2017-06-30 Page 2-7
Figure 2.4: Installing Antenna Ground Switch and RF Output Connector
Antenna Ground Switch
(Nautel Part # 213-8320-07)
*remove side cover to access connections
to transmitter and RF output connector
RF Output Connector
(see assembly detail below)
ALUMINUM ROD SECURES TO OUTPUT PLATE
INSIDE TRANSMITTER USING M10 BUTTONHEAD
SCREW, COMPLETE WITH FLAT WASHER AND SPLIT
WASHER.
6-1/8” Field Flange
(user provided)
Adapter Plate, 6-1/8”
(Nautel Part # 207-8283-05)
*
NOTE : For proper orientation, ensure the
machined lip faces down
6-1/8” Spacer
(Nautel Part # 176-5050-05)
6-1/8” Spacer
(Nautel Part # 176-5050-06)
6-1/8” INNER CONDUCTOR (BULLET)
(user provided)
M10 BOLT (Nautel Part # HMSN01)
*
NOTE : Use 12 sets of M10 hardware
M10 nut (Nautel Part # HMN07)
M10 split washer (Nautel Part # HMW15)
M10 flat washer (Nautel Part # HMW07)
M10 ACORN NUT (Nautel Part # HMN22)
M10 SPLIT WASHER (Nautel Part # HMW15)
M10 FLAT WASHER (Nautel Part # HMW07)
M10 HEX NUT (Nautel Part # HMN07)
M10 BOLT (Nautel Part # HMSN04)