Nautel NX3, Installation Manual

Page: 34 / 70

NX5/NX3 INSTALLATION MANUAL INSTALLING AUDIO INPUTS
PAGE 2.6.2 VERSION 3.1 2021-04-22
6. With the audio input cables near their destination, cut each wire to the required length and install
connectors, as necessary.
7. Remove plastic cap-plugs from the connectors on the exciter panel, if applicable.
8. Connect the audio input cable(s) to the appropriate connector(s) on the control/monitor PWB (A4)
as shown in
Figure 2.6.3 on page 2.6.4 . Secure cables using the appropriate arrowhead tyraps
(Nautel Part # HT76) in the ancillary kit (see Figure 2.6.3 on page 2.6.4 to locate tyrap anchor hole
locations).
9. If you are using an external USB device as your playlist, connect the USB device to a USB port (J3B
or J3C) on the control/interface PWB (A4). Refer to the Operations and Maintenance Manual for
details on using the Audio Player’s Playlist feature, available through the remote AUI.