Nautel NX3, Installation Manual

Page: 25 / 70

NX5/NX3 INSTALLATION MANUAL CONNECTING AC POWER
VERSION 3.1 2021-04-22 PAGE 2.4.3
Figure 2.4.1: NX5/NX3 Ac Power Cable Routing
TOP AC
INPUT ENTRY
BOTTOM AC
INPUT ENTRY
POSITION FERRITE ASSEMBLY
HERE FOR BOTTOM AC ENTRY
POSITION FERRITE ASSEMBLY
HERE FOR TOP AC ENTRY
POWER TRANSFORMER
PRIMARY CONNECTIONS
(LINE 1, 2 AND 3)
ROUTE CABLES ALONG INTERIOR
CHANNEL FOR TOP ENTRY
Remove two nuts and associated wash-
ers from studs to allow re-positioning of
ferrite assembly
AC WIRING ACCESS HOLE HAS A REMOVEABLE
PLATE WITH A PRE-CUT 3/8-INCH DIA HOLE.
USE A CHASSIS PUNCH TOOL (e.g., GREENLEE)
TO CREATE THE DESIRED HOLE SIZE (UP TO
2 INCHES) ON THE PLATE. REMOVE THE PLATE
TO ACCESS A SMALLER RECTANGULAR HOLE.