Nautel NX25, Operation And Maintenance Manual

Page: 99 / 162

NX300 Operations and Maintenance Manual Operating the transmitter
Issue 3.0 2012-11-01 Page 2-81
SNMP Configuration
The SNMP configuration page provides a user with a means to configure the SNMP agent and the
associated traps (see
Figure 2.59 ).
Figure 2.59: User Settings - SNMP Configuration - Agent Tab
Agent Settings
Using the Agent tab you can configure the SNMP agent as follows:
1. Enter the five fields, noting the following:
• Agent Port: Enter the UDP port where the SNMP agent checks for requests. The default
setting is 161. If your transmitter is behind a firewall, you must open this port to use
SNMP.
• Read Community
:
Enter the password for the SNMP client application to allow
acquisition of channel values. Provide confirmation of this password in the Confirm
field.
• Write Community: Enter the password for the SNMP client application to allow changing
of channel values. Provide confirmation of this password in the Confirm field.
2. Click the Enable Traps check box to allow the SNMP agent to send trap notifications. Enter
the two additional fields as follows: