Nautel NX25, Operation And Maintenance Manual

Page: 109 / 162

NX300 Operations and Maintenance Manual Operating the transmitter
Issue 3.0 2012-11-01 Page 2-91
Screen configuration
The
Screen Configuration
page (see Figure 2.67 ), available on the local AUI only, allows you to
perform a calibration on the touchscreen and to configure a screen saver for the local AUI.
Figure 2.67: System Settings - Screen Configuration (local AUI only)
Procedure to calibrate the touchscreen:
1. Select the
Screen Configuration
option on the left side of the
System Settings
page to
open a related window on the right side of the page.
2. Press the
Touchscreen Calibration
button. This will initiate a calibration screen, where
you will be prompted to sequentially touch three targets from a position of normal use.
Touch each target. After the third target, the calibration is complete and the screen display
returns to the
Screen Configuration
page.
Procedure to configure a screen saver:
1. Select the
Screen Configuration
option on the left side of the
System Settings
page to
open a related window on the right side of the page.
2. To enable a screen saver, press the
Screen Saver Enabled
check box. This allows you to set
the
Screen Saver Timeout
period (between 10 and 180 minutes; default is 10 minutes) by
pressing in the
Minutes
field and entering, using the numeric keypad that appears, the
desired timeout period.
3. Press the
Apply
button to activate the change. The screen saver is now enabled. If the
timeout period lapses between local AUI screen touches, the AUI screen will switch to
screen saver mode (black screen). Touch the screen to restore the last AUI page.