Nautel NV15, Operation And Maintenance Manual

Page: 141 / 166

NV15/NV20 Operations and Maintenance Manual Operating the transmitter
Issue 3.2 2013-10-01 Page 2-109
if the selected channel is
Auto Changeover Enabled
, the drop-down options are:
•
Output Low When Enabled
. Logic ‘0’ (low) indicates the output is true (Enabled); Logic ‘1’
(high) indicates the output is false (Disabled).
•
Output Low When B
. Logic ‘0’ (low) indicates the output is true (Disabled); Logic ‘1’ (high)
indicates the output is false (Enabled).
if the selected channel is
Preset: Preset 1
, the drop-down options are:
•
Output Low When Active
. Logic ‘0’ (low) indicates the output is true (Active); Logic ‘1’
(high) indicates the output is false (Inactive).
•
Output Low When Inactive
. Logic ‘0’ (low) indicates the output is true (Inactive); Logic ‘1’
(high) indicates the output is false (Active).
if the selected channel is
Modulation Loss
, the drop-down options are:
•
Output Low When True
. Logic ‘0’ (low) indicates the output is true (True); Logic ‘1’ (high)
indicates the output is false (False).
•
Output Low When False
. Logic ‘0’ (low) indicates the output is true (False); Logic ‘1’ (high)
indicates the output is false (True).
Press
Apply
to activate changes. Press
Cancel
to discard changes.
Analog outputs
There are eight analog outputs that can have their scaling configured to reflect what output voltage
yields a full scale deflection (see
Figure 2.84 on page 2-110 ).
• Forward Power
• Reflected Power
• PA Voltage
• Total PA Current
• RF Drive Power