Nautel NARF79, Installation Manual

Page: 24 / 86

VX150 TO VX2 INSTALLATION MANUAL DESCRIPTION
PAGE 1.1.2 VERSION 0.3 2021-01-14
Ac Power
The VX series transmitter can operate from a nominal 50/60 Hz (between 47 and 63 Hz), single-phase
ac power source at voltages between 90 and 265 V ac (VX150, VX300 and VX600) or between 185 and
265 V ac (VX1, VX1.5 and VX2).
The VX1, VX1.5 and VX2 models can operate at reduced power at lower ac voltages (between 90 and
185 V ac).
For detailed electrical requirements (e.g., input power, maximum line current, etc.), refer to Table 1.5.1
in Section 1.5, “Electrical Requirements” .
Transmitter Configuration
VX150 to VX2 transmitters are factory shipped with a base-level, standard configuration, with the
hardware and features shown in
Table 1.1.1 .
Table 1.1.1: VX150 to VX2 Transmitter Configurations
MODEL/
NOMENCLATURE
AC INPUT
RANGE
RF OUTPUT
CONNECTO
R
PA POWER
SUPPLY OUTPUT
NUMBER OF
POWER
AMPLIFIERS
PS INTERFACE
PWB
VX150, VX300 and
VX600
(Nautel Part # NARF81)
185-265 V ac TYPE N
(female)
18-53 V dc
(Nautel Part # UG132)
1 Nautel Part #
NAPI118/01
VX1
(Nautel Part # NARF79)
90-265 V ac 7/16 DIN
(female)
23-65 V dc
(Nautel Part # UG136)
1 Nautel Part #
NAPI118
VX1.5 and VX2
(Nautel Part # NARF80)
185-265 V ac 7/16 DIN
(female)
23-65 V dc
(Nautel Part # UG136)
2 Nautel Part #
NAPI118