Single Use Pre-
Sized XactTrace™ Belt System User Instructions
2
Warnings and Cautions
XactTrace shall be worn over the patient's clothing The belts are
single use.
Do not stretch the belts too tightly around the patient as this may
cause discomfort
Caution must be taken to ensure that cables do not encircle the
patient's neck. Special attention is needed in the case of children.
Use the device only under the direction and supervision of a
physician or trained technologist.
Avoid all unnecessary contact with moisture when using the device.
Do not use damaged belts, sensors or cables.
Caution: U.S. Federal law restricts this device to sale by, or on the
order of, a physician.
This product is for diagnostic purposes only, and is not to be used as
an apnea monitor.
Do not use the device in an explosive environment
—in other words,
in the presence of flammable liquids, such as an anesthetic mixture
with air, or with oxygen or nitrous oxide.
Connect the XactTrace sensors only to an input that is electrically
isolated from the mains power. Do not plug the cables into electrical
outlets, as this could result in serious electrical shock.
Portable and mobile RF communications can affect the performance
of the device.
Electrostatic discharges (ESD) may cause artifacts in the signal from
the device. A trained operator should be able to recognize these
artifacts easily. Avoid conditions where electrostatic charge can build
up due to low humidity and friction against carpets, clothing, and
sheets made from artificial fibers.
Universal applications require an external RIP Processor which
contains a battery; therefore, it must be disposed of properly. Local,
state, or national laws might prohibit disposal of batteries in ordinary
trash. Contact your local waste authority for information regarding
available recycling and disposable options.
