background image

 

*013190*

 

REF: 013190, Rev. 06 

Single Use Pre-Sized XactTrace System User Instructions 

Copyright © 2017 Natus Medical Incorporated. All rights reserved. 

Printed in China. 

 013190, Rev. 06 

 

All rights reserved. This manual contains proprietary information, which 
is protected by copyright and may not be copied in whole or in part 
except with the prior written permission of Natus Neurology Incorporated. 
The copyright and the foregoing restrictions on the copyright use extend 
to all media in which this information is preserved. 

This copy of the User Manual shall be used only in accordance with the 
conditions of sale of Natus Neurology Incorporated or its distributors. 
Natus Neurology Incorporated makes no representations or warranties of 
any kind whatsoever with respect to this document. Natus Neurology 
Incorporated disclaims all liabilities for loss or damage arising out of the 
possession, sale, or use of this document. 

 

For assistance, please contact Embla Technical Support 
(

[email protected]

). 

  

Embla Systems, a Natus Medical company. 

MANUFACTURER 

EUROPEAN REPRESENTATIVE 

 

Embla Systems 

1 Hines Road, Suite 202 

Kanata, ON K2K 3C7 

Canada 

Tel. : +1.613.254.8877 

Fax : +1.613.270.0627 

 

Natus Manufacturing Limited 

IDA Business Park, Gort,  

Co. Galway, Ireland 

 

Tel. : +353-(0)91-64700 

Fax : +353-(0)91-630050 

TOLL-FREE IN NORTH AMERICA: 888 NO APNEA (888.662.7632) 

www.natus.com

     

[email protected]

  

 

 

Summary of Contents for XactTrace











Reviews: