69
Resetting the markers
If you have repositioned markers that have been placed automatically by the system, you can return those markers to their original
positions by pressing
Results
>
Reanalyze
in the menu bar.
Erasing data
1.
Click the waveform to highlight it.
2.
Right-click the waveform.
3.
Select
Erase
. Data is removed from the trace and results are cleared from the Results Table.
4.
To undo the erase, right-click the waveform and select
Unerase
.
IMPORANT: If unerasing, it needs to be done immediately.
Deleting data
1.
Click the waveform to highlight it.
2.
Click the
Delete
function key.
3.
The data, trace and site are deleted from the trace area and Results Table.
IMPORTANT: There is no undo function.
Superimposing Traces
1.
Click the Superimpose function key. All waveforms for a given channel are superimposed.
The superimposed traces are displayed in the center of the screen.
2.
Click the Superimpose function key again to return the traces to their original positions.
Reports
There are two locations to configure a report:
1.
From the Patient Screen: Select Edit/User Profile Setup/Report Setup, select the options for the desired report configuration.
Three Report templates can be configured for overall report structure and content.
NOTE
: Report 1 can be configured as an On-line Report allowing interactive changes between the data and the report. To
select a report (Report 1, Report 2, or Report 3) options, from the Patient Screen, Test History menu, click the Add Report
(Plus icon) drop down arrow.
2.
From the Test Screen: Select Edit/Test Report Setup and include the desired elements (table, comments, graphs, etc.) to be
added to the report for that specific test.
To transfer traces to a report, from the test screen Results menu, select Transfer Traces to Report. To transfer specific traces,
highlight the desired traces and select Transfer Selected Traces to Report.
To view the Report, click the Report icon. To print the report, click File/Print.
Print screen
Click the Print Screen Icon to print the screen. Click Print Setup to configure the Print Screen option
s
