natus UltraPro S100, User Manual, Page: 65 / 88

September 13, 2018 4-9
Performing an Exam
Marking data
1. Markers are placed automatically as the responses are acquired.
2. To adjust the markers, click the desired marker and drag it to its new
location or use the Marker knob to move the Red marker; push the Marker
knob to advance to the next marker.
3. To manually position latency or amplitude markers, select Mark Toolbar
from the Function keys.
4. From the toolbar that appears, you can Clear, Clear All, Hide, Show, Fast
Mark or place individual markers.
5. If using the UltraPro S100 Control Panel, press the Marker Control
Wheel to activate/advance through the markers. Turning the wheel allows
you to position the active marker (Red) appropriately
Note: To remove a marker, use the Mark Toolbar in the function keys. Click the
undesired marker on the waveform, it turns red. Then select Clear from the Mark
Toolbar.
6. To repeat on additional traces, use the Up/down Cursor keys to activate the
correct trace and repeat the previous steps.
Resetting the markers
If you have repositioned markers that have been placed automatically by the
system, you can return those markers to their original positions by pressing
Analysis > Reanalyse in the menu bar.