natus UltraPro S100, User Manual, Page: 61 / 88

September 13, 2018 4-5
Performing an Exam
Testing using Study
menu
1. From Study Menu, double-click the exam to enter the waveform screen.
Select/change to left or right side by clicking the Reverse icon.
2. Perform the exam.
3. Press or cick the Next Study Exam function key.
4. Continue with testing until completed.
Testing using Test
menu
1. From Test Menu, select the test type you want from the appropriate folder.
2. From the waveform screen, the Select protocol dialog box appears.
Choose the protocol and side that you want to use for this exam and click
OK .
3. Proceed with testing.
4. When this test is completed, while still in the waveform screen, press or
click the New Nerve navigation key (if performing a nerve of the same
type) or Exit Test (if the nerve is from another folder).
5. Perform the exam.
6. Continue with testing until completed.
Patient to report in
seven steps
The typical procedure for performing an exam is as follows:
1. Click New Patient (or End Visit if prior patient’s exam is not ended).
2. Enter the Current Patient Information.
3. Click Save .
4. Acquire the exams.
5. Look at Report.
6. Return to Test Menu/Study Menu.
7. Click End Visit prior to starting next patient.