Natus Quantum Amplifier
User & Service Manual
60
6. If there are two Quantum Breakouts in-use, first connect the 013833 stim input cable to the
Nicolet Cortical Stimulator. Next, attach the 013769 stim daisy chain cable to the 013833 stim
input cable on one side and to the
connections on the Quantum Main and Secondary
Breakout Boxes. Please refer to the diagram below for reference.
Natus Base Unit connected to the Nicolet Cortical Stimulator when two breakout boxes are used.
9.7. Powering Down the System
Utilize the following steps to ensure your system is powered down completely and safely.
1. Close any active studies in the
NeuroWorks
software.
2. Shut the computer down; ensuring to follow the proper shut down procedure.
3. On the base LCD press and hold the Shutdown button for 3 seconds.
4. Unplug the power cord from the wall.
