natus Nicolet EEGwireless32, User Manual, Page: 67 / 138

April 27, 2015
5-5
Using the Nicolet system to setup and acquire EEG
Starting a study
Select the amplifier
for the study To start a study while connected to a Nicolet acquisition station, either directly or
over a network, you must first select an amplifier from which to acquire EEG.
1. Each amplifier has a unique identifier (Figure 2). Select the amplifier from the
Wireless Panel dialog with the same identifier as your amplifier. If the dialog in
Figure 2 does not appear and you see an “Amplifier Disconnected,” select the
proper Protocol from the Protocol menu to view the wireless panel dialog.
Figure 2.
NOTE: In the event that the amplifier you select is still storing data from a previous
exam, you will see a prompt asking you to either download the data or erase the data
from the amplifier. If you choose to download the data, the amplifier will perform
data catch-up. See Data Catch-Up in this chapter for more information. Also see
Clearing the amplifier’s onboard memory
in Chapter 4.