natus Nicolet EEGwireless32, User Manual, Page: 58 / 138

Nicolet Systems
4-8
April 27, 2015
Start a study from the amplifier
If you attempt to start a study and the Stop Recording button blinks (C in Figure 1),
that is an indication that data is present on the amplifier and you cannot start a study.
See
Clearing the amplifier’s onboard memory
section later in this chapter to clear
data from the amplifier.
1. Press the
Start Study (Record) button ( A in Figure 1) for 3 - 5 seconds to start a
study.
The Study Started LED ( B ) illuminates when the study starts.
Stop a study from the amplifier
1. Press the Stop Study button ( C in Figure 1) for 12 seconds to stop a study.
The Study Stopped LED ( D ) illuminates and the Study Started LED ( B ) turns
off when the study stops.
Figure 1
Turn off the amplifier
1. Press the
Power
button (
A
in Figure 2) for 12 seconds.
When power is turned off, the
Power LED
(
B
) turns off.
Figure 2
A B C D
A B