background image

 

 

neoBLUE

®

 mini System User Manual  

 P/N 051440D 

 

 

 

1.4   Adjustable Arm 

The arm is designed to attach to poles with 0.75 to 1.5 inch (1.91 to 3.81 cm) diameters. 

1.5   Power Requirements and Accessories 

The light runs off a 12V DC power supply.  The power supply is mains-power operated. 

The power unit is supplied pre-attached to the pole mount portion of the arm.  Grooves in 

the bottom of the arm hold the power cord for safe cable management. 

1.6   Accessory Pack 

An accessory pack is included with each light.  The accessory pack contains the following 

items: a CD containing the user manual and service manual and a power cord. 

2. Safety Information 

2.1

  

Explanation of Terminology

 

This manual presents three types of precautionary information. The three types of 

statements carry equal weight; that is, they are of equal importance to the safe and effective 

use of the light. Each statement is categorized by using an introductory word in boldface as 

follows: 

 

 

 

Warning!

  Identifies conditions or practices that might present danger or 

possible injury to the patient and/or user. 

 

 

Important!  

An instruction provided to help ensure correct clinical results and 

provide quality assurance to the phototherapy procedures. 

 

 

Caution:  

An instruction that, if not followed, can result in a condition that could 

damage the light. 
Other explanatory information is highlighted with the word 

Note

. Information in this 

category is not considered precautionary. 

 

 

Note:  

Background information provided to clarify a particular step or procedure. 

2.2   General Safety Information 

Before administering phototherapy, read all sections of this manual carefully. Observe all 

precautions to ensure the safety of the patient and those near the instrument. In addition, 

please refer to your hospital policy and procedure for phototherapy administration. 

 

Warning!

  Incorrect use of the light, or the use of parts and accessories that are not 

manufactured or supplied by Natus Medical Inc., can damage the light, and may cause 

injury to the patient and/or user. 
Do not use the light if any parts appear damaged or if there is any reason to believe that it 

is not functioning properly. Contact Natus Medical Technical Service or your authorized 

service provider. 

Summary of Contents for neoBLUEmini

















Reviews: