background image

 

 

ALGO

®

 3i Newborn Hearing Screener IFU 024913 RevD   Revision Date 08/05/2020 

Caution: Federal law restricts this device to sale by or on the order of a physician (or properly licensed practitioner). 
 

AABR, ALGO, and Natus are registered trademarks of 

Natus Medical Incorporated 

SpeedScreen and SoftClip are trademarks of Natus Medical 

Incorporated 

NuPrep is a trademark of D.O. Weaver & Co. 

Windows and Windows Explorer are registered trademarks 

of Microsoft Corporation. 

Copyright © 2020 by Natus Medical Incorporated: All 

content within this document is owned by Natus Medical 

Incorporated 

Distribution of contents to persons other than customers of 

Natus is strictly prohibited 

Reproduction of any part of this document without the 

expressed written consent of Natus is strictly prohibited 

 

Natus Medical Incorporated 
5900 First Avenue South 

Seattle, WA 98108 USA 
Toll-free: +1-800-303-0306 

Telephone: +1-650-802-0400 
Fax: +1-650-802-8680 

E-mail: [email protected] 
Global Sales & Support: 1-800-303-0306 Fax: 1-650-802-0401 

www.natus.com 

 

Technical Contact Information: In the United States, contact Natus Technical Service at +1-888-496-2887  
or +1-650-802-0400. Outside the United States, please contact your authorized service representative. 

 

 

 

 

 

 

 

 

 

© 2020 Natus Medical Incorporated

 

 

Natus Manufacturing Limited 
IDA Business Park 

Gort Co. Galway, Ireland 
Tel.: +353 (0)91 647400 

Website: natus.com 

 

 

Summary of Contents for ALGO 3i



















































Reviews: