V. ALGO 3i Screening Procedure
ALGO
®
3i Newborn Hearing Screener IFU 024913 RevD Revision Date 08/05/2020
18
System error: The ALGO 3i screener may provide information on any system
errors which have occurred, and will only proceed to the MainMenu if the system is
verified. If the current time and date has been lost, the ALGO 3i screener will
prompt you to reset these values prior to proceeding.
PasswordProtection feature: If a password is required to gain access to the
MainMenu, this feature is enabled. Enter the correct password to proceed.
Warning!
You must turn off the device prior to disconnecting and reconnecting cables.
Step 2: Observe MainMenu
Observe that two screening modes may be displayed in the MainMenu window:
• SpeedScreen mode for advanced users (see next section after Steps 12)
• Enter Data and Screen Baby mode (ScreenBaby mode).
Step 3: Select screening mode
ScreenBaby mode is the standard and default screening mode used when infant information is
required for the infant record, and for new users. ScreenBaby mode allows users to create an
infant record and to select screening configurations prior to starting the screening process.
A.
Select Enter Data/ScreenBaby and click “OK”
B.
The ALGO 3i screener will advance to the Infant Data window.
Infant Data Window
C.
In the Infant Data window, enter infant information for the screening record. There are
three data fields in the first Infant Data window: Infant Identifier, Last Name and First
Name. There are another three data fields in the second window: Date of Birth, User
Identifier, and Comment. The default for each field is a blank space, and all data fields
contain 12 data spaces, except for Last Name and Comment which can contain 24 data
spaces. Required fields will be indicated in pink type. You must enter data in required fields
before proceeding.
The Last and First Name and Comment fields are always alpha-numeric. The User and
Infant Identifiers may be numeric only, or alpha-numeric. The alpha-numeric option may be
selected from the User Preferences window.
The Date of Birth contains separate day, month, and year fields, which will appear in the
order selected in the User Preferences window (Date and Time Format).
Example: Enter infant’s birth date as 28 February 2005.
i. Enter the Infant ID field and scroll down to “Date of Birth”.
ii. The cursor will be positioned on the first field, the day.
iii. Toggle down through the numbers 31…30…29….28.
iv. Toggle right to set the day to 28 and move to the second field, the month.
v. Toggle up through the months JAN…FEB.
vi. Toggle right to set the month to February and move to the third field, the year.
vii. Toggle either up or down to select the correct year.
viii. Scroll to the next Infant Data field, or click OK to exit the Infant Data area.