Naturkind Lux Evo, Operating And Cleaning Instructions

Page: 54 / 96

54
If the suspension is not fully functional – due
to the terrain being travelled on or a load of the
stroller of 10 kg or more – so that the stroller is no
longer continuously sprung when being used, the
preload of the suspension needs to be adjusted.
Please proceed as follows:
1. Turn the empty frame until the wheels are on
top.
2. Adjust the suspension with the two levers
(22) that are located close to the back wheels
by shifting them until they reach the mecha-
nical stop.
3.18 Adjusting the suspension
WARNING! After every adjustment of the sus-
pension, make sure that the suspension is
equally adjusted on both sides.
1. To remove a swivelling wheel, push the
pressure point that is located at the center of
the locking devices (6).
2. To mount a swivelling wheel, place the wheel
in the receiver until it audibly engages.
3.17 Removing and mounting the swivelling wheels
WARNING! After the wheels have been
mounted, check that they have been firmly
mounted.